Electrical service across all of Connecticut — dispatch answered 24 hours Call (833) 652-8933
DANIELS ELECTRIC SOLUTIONS Electricians & electrical services in Connecticut (833) 652-8933

Home / Locations / Old Lyme, CT / Whole House Rewiring

Whole House Rewiring in Old Lyme, CT

Old cloth-covered wiring, knob and tube in the attic, two-prong outlets with no ground, or 1970s aluminium branch circuits — all of it is common in Old Lyme housing stock and all of it is fixable. We stage whole-house rewiring so you can keep living in the house while it happens.

Whole House Rewiring across Old Lyme, Norwich, Preston and the rest of New London County.

What our whole house rewiring service covers in Old Lyme

  • Whole-house rewiring, staged floor by floor
  • Knob and tube wiring removal and replacement
  • Aluminium branch wiring replacement or approved pigtailing
  • Cloth and rubber-insulated cable replacement
  • Grounding retrofit for two-prong outlet circuits
  • Partial rewires — kitchen, attic, basement, single floor
  • New circuit runs for additions and conversions
  • Panel replacement bundled where the old panel is also due

One price, agreed first. You get a flat figure for the whole job in Old Lyme — parts, labour, permit where one is needed, and cleanup — before anyone starts. It does not move afterwards.

  • Written quote you can hold us to, not a verbal ballpark
  • Workmanship warranty on every install we complete
  • Drop cloths down, shoes covered, debris hauled out
  • Code-compliant work and we pull the permits when they are required

Call (833) 652-8933 or request a time.

Typical scope and timing

JobTypical time on siteNotes
Single floor or partial rewire3–5 daysLeast disruptive option
Whole house, staged in phases2–4 weeks totalHouse stays occupied
Whole house during a gut renovation1–2 weeksCheapest per circuit — open walls
Aluminium wiring pigtail correction1–2 daysWhere full rewire is not warranted

Timings are typical for Old Lyme properties. Your flat quote is confirmed on site before any work begins.

What we find in older Old Lyme homes

Knob and tube is the headline problem — no ground conductor, brittle insulation, and frequently buried under blown-in insulation it was never designed to sit against. Insurers increasingly refuse or surcharge houses that still have live knob and tube, which is why a lot of Old Lyme rewires start with a letter from an underwriter rather than a fault.

The quieter problem is aluminium branch wiring from the mid-1960s to late 1970s. The conductor expands and contracts more than copper, connections loosen over time, and loose connections make heat at the exact places you cannot see. Sometimes the correct answer is a full rewire; sometimes it is approved connector pigtailing at every device, which is far cheaper. We will tell you which your house needs and why.

How we rewire without gutting the house

The fear people have is plasterboard everywhere and living in a building site for a month. That is what happens when a rewire is planned badly. Done properly, most runs go through attic and basement space, down existing wall cavities, and behind removable trim — so we open small, targeted access points rather than long channels.

We work one zone at a time. A floor gets isolated, rewired, tested and put back before we move on, so you always have working power and lighting somewhere. We patch and make good every opening we create as part of the price — that is not a separate trade you have to organise afterwards.

Rewiring is the moment to fix everything else

While the runs are open, adding circuits costs a fraction of what it will cost later. This is the point to put in the dedicated kitchen appliance circuits you are missing, the outlets you have been running extension leads to, hardwired interconnected smoke detectors, structured data cabling, and the 240V run for a future EV charger or heat pump.

We will build a circuit plan with you before the first cable goes in, room by room, so you get the house you actually use rather than a like-for-like copy of a 1940s layout. It is the single biggest opportunity to future-proof a Old Lyme property.

Whole House Rewiring in Old Lyme — what to expect locally

Bundling saves Old Lyme customers real money. If you have other electrical items on a list — an outlet that never worked, a fan you have been meaning to fit, a panel that could use labelling — mention them when you book the whole house rewiring. Doing them in one visit costs far less than a second call-out later.

Most of our whole house rewiring work in Old Lyme comes from two directions: people who searched for it after something failed, and people planning ahead because they are renovating, buying or adding an appliance. The second group almost always pays less, because nothing has to be done at short notice and the sequencing can be sensible. If you are in the first group, call (833) 652-8933 and we will deal with today first.

Whole House Rewiring near Old Lyme

Whole House Rewiring across Old Lyme and the surrounding New London County towns.

We provide whole house rewiring throughout Old Lyme — including west Old Lyme and the Old Lyme town line — and across the neighbouring towns below. If you are just over a town line, you are still in our area.

Need something else while we are on site? Bundle it into one visit and pay a single call-out.

Old Lyme customers on this work

★★★★★

Dimmers that buzzed for two years. Wrong type for the fixtures. Ten minutes of explanation and a swap. Silent now.

Simone K.Old Lyme, CT
★★★★★

Electrical inspection before we bought a house here in Old Lyme. Detailed report, photos, and a realistic repair number we used in the negotiation.

Neil B.Old Lyme, CT
★★★★★

EV charger and an outdoor outlet in one trip so I only paid one call-out. Small thing but I noticed.

Tara Q.Old Lyme, CT

Whole House Rewiring in Old Lyme — common questions

How much does whole house rewiring cost in Old Lyme?

It scales with square footage, number of circuits, how accessible the runs are, and how much making-good is needed. A partial or single-floor rewire is a fraction of a whole-house job, and rewiring during an existing renovation is much cheaper than rewiring a finished, furnished house. We survey, then quote one flat figure by phase. Call (833) 652-8933 to book a survey.

Can we stay in the house during a rewire?

Almost always, yes. We stage the work zone by zone so there is always working power and light in the parts of the house you are using. Expect some disruption on the days we are in a given room, but not a month of camping in the dark.

Do I have to replace knob and tube wiring?

Legally, existing knob and tube is generally allowed to remain if it is undisturbed and in good condition. Practically, insurers in Connecticut increasingly will not cover it, home inspections flag it, and any circuit buried in insulation or spliced into by a previous owner is a genuine risk. Most Old Lyme owners replace it when they are refinancing, selling or renovating.

Is aluminium wiring always a full rewire?

No. Where the aluminium is confined to branch circuits and the terminations are accessible, approved pigtailing at each device using the correct connectors is an accepted correction and costs far less. Full replacement makes sense when connections have already overheated, when walls are open anyway, or when the panel and service are also due.

Will you patch the walls you open?

Yes, making good is part of our price. We patch, tape and finish ready for your decorator. We do not paint, and we will say so upfront rather than leaving it ambiguous.

See the statewide whole house rewiring page, all electrical services in Old Lyme, or the advice blog.

Whole House Rewiring in Old Lyme — get a flat price

Call and describe the job. We will give you a real number and a real arrival window for your Old Lyme address, at any hour.

Call(833) 652-8933

Request service

Call (833) 652-8933 Book a time