Home / Locations / Franklin, CT / Whole House Rewiring
Whole House Rewiring in Franklin, CT
Old cloth-covered wiring, knob and tube in the attic, two-prong outlets with no ground, or 1970s aluminium branch circuits — all of it is common in Franklin housing stock and all of it is fixable. We stage whole-house rewiring so you can keep living in the house while it happens.
Whole House Rewiring across Franklin, East Lyme, Griswold and the rest of New London County.
- 1Emergency Electrician in Franklin
- 2Electrical Panel Upgrade in Franklin
- 3EV Charger Installation in Franklin
- 4Whole House Rewiring in Franklin
- 5Generator Installation in Franklin
- 6Lighting Installation in Franklin
- 7Outlet & Switch Installation in Franklin
- 8Electrical Repair & Troubleshooting in Franklin
- 9Commercial Electrician in Franklin
- 10Smart Home Wiring in Franklin
What our whole house rewiring service covers in Franklin
- Whole-house rewiring, staged floor by floor
- Knob and tube wiring removal and replacement
- Aluminium branch wiring replacement or approved pigtailing
- Cloth and rubber-insulated cable replacement
- Grounding retrofit for two-prong outlet circuits
- Partial rewires — kitchen, attic, basement, single floor
- New circuit runs for additions and conversions
- Panel replacement bundled where the old panel is also due
One price, agreed first. You get a flat figure for the whole job in Franklin — parts, labour, permit where one is needed, and cleanup — before anyone starts. It does not move afterwards.
- Live phones 24 hours a day, including weekends and holidays
- Same-day and next-morning slots for most Franklin addresses
- Written quote you can hold us to, not a verbal ballpark
- Workmanship warranty on every install we complete
Typical scope and timing
| Job | Typical time on site | Notes |
|---|---|---|
| Single floor or partial rewire | 3–5 days | Least disruptive option |
| Whole house, staged in phases | 2–4 weeks total | House stays occupied |
| Whole house during a gut renovation | 1–2 weeks | Cheapest per circuit — open walls |
| Aluminium wiring pigtail correction | 1–2 days | Where full rewire is not warranted |
Timings are typical for Franklin properties. Your flat quote is confirmed on site before any work begins.
What we find in older Franklin homes
Knob and tube is the headline problem — no ground conductor, brittle insulation, and frequently buried under blown-in insulation it was never designed to sit against. Insurers increasingly refuse or surcharge houses that still have live knob and tube, which is why a lot of Franklin rewires start with a letter from an underwriter rather than a fault.
The quieter problem is aluminium branch wiring from the mid-1960s to late 1970s. The conductor expands and contracts more than copper, connections loosen over time, and loose connections make heat at the exact places you cannot see. Sometimes the correct answer is a full rewire; sometimes it is approved connector pigtailing at every device, which is far cheaper. We will tell you which your house needs and why.
How we rewire without gutting the house
The fear people have is plasterboard everywhere and living in a building site for a month. That is what happens when a rewire is planned badly. Done properly, most runs go through attic and basement space, down existing wall cavities, and behind removable trim — so we open small, targeted access points rather than long channels.
We work one zone at a time. A floor gets isolated, rewired, tested and put back before we move on, so you always have working power and lighting somewhere. We patch and make good every opening we create as part of the price — that is not a separate trade you have to organise afterwards.
Rewiring is the moment to fix everything else
While the runs are open, adding circuits costs a fraction of what it will cost later. This is the point to put in the dedicated kitchen appliance circuits you are missing, the outlets you have been running extension leads to, hardwired interconnected smoke detectors, structured data cabling, and the 240V run for a future EV charger or heat pump.
We will build a circuit plan with you before the first cable goes in, room by room, so you get the house you actually use rather than a like-for-like copy of a 1940s layout. It is the single biggest opportunity to future-proof a Franklin property.
Whole House Rewiring in Franklin — what to expect locally
Rentals and second properties in Franklin are a decent share of our work, and we are set up for it: we coordinate access with tenants directly if you prefer, send photographs of what we found and what we did, and invoice in a form that suits your records. Tell us the arrangement when you call (833) 652-8933.
Bundling saves Franklin customers real money. If you have other electrical items on a list — an outlet that never worked, a fan you have been meaning to fit, a panel that could use labelling — mention them when you book the whole house rewiring. Doing them in one visit costs far less than a second call-out later.
Whole House Rewiring near Franklin
We provide whole house rewiring throughout Franklin — including the Franklin town line and the north side of Franklin — and across the neighbouring towns below. If you are just over a town line, you are still in our area.
- Whole House Rewiring in East Lyme
- Whole House Rewiring in Griswold
- Whole House Rewiring in Colchester
- Whole House Rewiring in Groton
- Whole House Rewiring in Bozrah
- Whole House Rewiring in Lebanon
- Every town in Connecticut
Need something else while we are on site? Bundle it into one visit and pay a single call-out.
- Emergency Electrician in Franklin
- Electrical Panel Upgrade in Franklin
- EV Charger Installation in Franklin
- Generator Installation in Franklin
- Lighting Installation in Franklin
- Outlet & Switch Installation in Franklin
- Electrical Repair & Troubleshooting in Franklin
- Commercial Electrician in Franklin
- Smart Home Wiring in Franklin
- All electrical services in Franklin
Franklin customers on this work
The hot tub circuit our previous electrician left was not right. Daniels corrected the disconnect and bonding and passed inspection first time.
Whole-house generator. They sized it properly instead of upselling me, ran the transfer switch neatly, and tested it under load before leaving. First real outage in Franklin and the house never blinked.
Half the kitchen went dead on a Sunday night. Someone actually answered the phone, and a crew was in my Franklin kitchen by nine the next morning. Bad splice in a junction box. Fixed, tested, and the price was the price.
Whole House Rewiring in Franklin — common questions
How much does whole house rewiring cost in Franklin?
It scales with square footage, number of circuits, how accessible the runs are, and how much making-good is needed. A partial or single-floor rewire is a fraction of a whole-house job, and rewiring during an existing renovation is much cheaper than rewiring a finished, furnished house. We survey, then quote one flat figure by phase. Call (833) 652-8933 to book a survey.
Can we stay in the house during a rewire?
Almost always, yes. We stage the work zone by zone so there is always working power and light in the parts of the house you are using. Expect some disruption on the days we are in a given room, but not a month of camping in the dark.
Do I have to replace knob and tube wiring?
Legally, existing knob and tube is generally allowed to remain if it is undisturbed and in good condition. Practically, insurers in Connecticut increasingly will not cover it, home inspections flag it, and any circuit buried in insulation or spliced into by a previous owner is a genuine risk. Most Franklin owners replace it when they are refinancing, selling or renovating.
Is aluminium wiring always a full rewire?
No. Where the aluminium is confined to branch circuits and the terminations are accessible, approved pigtailing at each device using the correct connectors is an accepted correction and costs far less. Full replacement makes sense when connections have already overheated, when walls are open anyway, or when the panel and service are also due.
Will you patch the walls you open?
Yes, making good is part of our price. We patch, tape and finish ready for your decorator. We do not paint, and we will say so upfront rather than leaving it ambiguous.
See the statewide whole house rewiring page, all electrical services in Franklin, or the advice blog.
Whole House Rewiring in Franklin — get a flat price
Call and describe the job. We will give you a real number and a real arrival window for your Franklin address, at any hour.