Electrical service across all of Connecticut — dispatch answered 24 hours Call (833) 652-8933
DANIELS ELECTRIC SOLUTIONS Electricians & electrical services in Connecticut (833) 652-8933

Home / Locations / Thompson, CT / Generator Installation

Generator Installation in Thompson, CT

Connecticut outages are storm-driven, and storm outages run long. A properly sized standby generator with an automatic transfer switch means your Thompson house keeps its heat, water, refrigeration and internet without anyone dragging a cord through a window at midnight.

Generator Installation across Thompson, Sterling, Windham and the rest of Windham County.

What our generator installation service covers in Thompson

  • Whole-house standby generator installation
  • Generac, Kohler, Briggs & Stratton and other brands
  • Automatic transfer switch (whole-panel or essential-circuits)
  • Generator sub panel wiring and circuit selection
  • Pad or bracket mounting and clearance compliance
  • Load calculation and honest sizing
  • Commissioning, load bank testing and handover
  • Manual transfer switch and inlet box for portable generators

One price, agreed first. You get a flat figure for the whole job in Thompson — parts, labour, permit where one is needed, and cleanup — before anyone starts. It does not move afterwards.

  • Same-day and next-morning slots for most Thompson addresses
  • Written quote you can hold us to, not a verbal ballpark
  • Workmanship warranty on every install we complete
  • Drop cloths down, shoes covered, debris hauled out

Call (833) 652-8933 or request a time.

Typical scope and timing

JobTypical time on siteNotes
Essential-circuits transfer switch install1 dayHeat, water, fridge, key outlets
Whole-panel automatic transfer switch1–2 daysEverything, larger unit needed
Portable generator inlet + manual switchHalf dayBudget option, needs you home
Generator relocation or replacement1 dayExisting pad and gas line reused

Timings are typical for Thompson properties. Your flat quote is confirmed on site before any work begins.

Sizing honestly, not upselling

The easiest way to sell a generator is to frighten someone into the largest unit on the price list. We would rather run the numbers. Most Thompson households do not need to run central air, an electric range and a hot tub during an outage — they need heat, well or boiler pump, refrigeration, some lighting, internet and the ability to charge devices. That is a much smaller and cheaper machine.

We build a circuit list with you, calculate the actual starting and running loads, and then recommend a unit that carries it with sensible headroom. If you genuinely want whole-house coverage including air conditioning, we will size for it and tell you what it costs — but you will be choosing that, not being steered into it.

Automatic versus manual, and where the real cost sits

An automatic transfer switch senses the outage, starts the generator, transfers the load, and reverses all of it when utility power returns — usually within thirty seconds and with nobody home. A manual switch with an inlet box costs a fraction as much but needs a portable generator, fuel on hand, and somebody physically present to start it.

The right choice depends on whether the property is occupied full-time, whether anyone in the house depends on powered medical equipment, and whether you have a well pump or a sump that cannot go unattended. We will lay out both properly. Note that the generator itself, the gas line and the pad are often larger line items than the electrical work — we will tell you which parts of the quote are ours and which are the plumber's or the supplier's.

Testing and the years afterwards

A generator that has never been tested under load is a decoration. On commissioning we run it against real load, verify the transfer and re-transfer timing, check the frequency and voltage under step loads, and walk you through the exercise schedule and what its status lights mean.

After that, an annual check keeps it honest — battery, oil, filters, transfer switch contacts, and a load test. Most generator failures in Windham County happen because a unit sat untested for four years and then met a February ice storm. We can look after that for you or show you what to check yourself.

Generator Installation in Thompson — what to expect locally

New construction and additions in Thompson get handled differently from retrofit work: we coordinate with your builder on the programme, work to the rough-in schedule, and get the inspection booked so the rest of the trades are not waiting on us. If you have a general contractor, put us in touch directly rather than routing messages through yourself.

We will tell you when something does not need doing. That happens often enough in Thompson that it is worth saying explicitly — plenty of things that look alarming are cosmetic, and plenty of upgrades can safely wait a year or two. You will get a straight ranking of what is a safety issue now and what is not.

Generator Installation near Thompson

Thompson customers on this work

★★★★★

Two dead circuits in a rental I own in Thompson. They diagnosed, repaired, and sent me photos for my records the same day. Tenants happy, no follow-up call needed.

Rob S.Thompson, CT
★★★★★

EV charger and an outdoor outlet in one trip so I only paid one call-out. Small thing but I noticed.

Tara Q.Thompson, CT
★★★★★

Whole-house generator. They sized it properly instead of upselling me, ran the transfer switch neatly, and tested it under load before leaving. First real outage in Thompson and the house never blinked.

Bill K.Thompson, CT

Generator Installation in Thompson — common questions

What size generator do I need for my Thompson home?

It depends entirely on which circuits you want running. An essential-circuits setup covering heat, water, refrigeration, lighting and internet is typically a modest unit. Whole-house coverage including central air needs considerably more. We build the circuit list and run the load calculation before recommending anything — call (833) 652-8933.

How much does whole house generator installation cost in Thompson?

The electrical portion — transfer switch, sub panel, wiring, permit, commissioning — is quotable flat once we have seen your panel and the proposed generator location. The generator unit itself and the gas supply are separate line items. We will break the quote out clearly so you can see exactly what each part costs.

Do you install Generac generators in Thompson?

Yes, Generac is the most common standby brand we install in Thompson, along with Kohler and Briggs & Stratton. We are happy to install a unit you have already bought, or to source one as part of the project.

How long does the installation take?

The electrical side of an essential-circuits install is usually a single day. A whole-panel automatic transfer switch is one to two days. If a gas line needs running or a concrete pad pouring, that adds calendar time but not necessarily our days on site.

Does a generator need a permit in Connecticut?

Yes — the transfer switch and generator circuit require an electrical permit and inspection, and the gas connection is separately permitted. We handle the electrical permit and inspection within our flat price.

See the statewide generator installation page, all electrical services in Thompson, or the advice blog.

Generator Installation in Thompson — get a flat price

Call and describe the job. We will give you a real number and a real arrival window for your Thompson address, at any hour.

Call(833) 652-8933

Request service

Call (833) 652-8933 Book a time